User's Manual

9.0 Battery charging
The Ana-digit Smartwatch is supplied with an external “Charger” device, which allows
you to charge your watch anytime and everywhere by simply connecting the Charger
to a USB port or an external 5V Power pack.
The SmartWatch has an integrated low-battery indication.
If the watch is in low-battery condition, the LED icons and will flash for 3
times alternately to alert you when any push button is activated.
Whenever your Smartwatchshows an low and critical battery level please proceed as
follows.
1. Connect your Charger to any USB port or a 5V Power pack.
2. Turn your watch and place the Charger flat and firmly on the case back of your
SmartWatch.
3. Make sure that the pins on the charger are matching the notches on the watch case
back.
4. During charging, the LED at 8H will be turned on. After fully charged, the LED at
8H will be turned off and LED at 11H will be turned on.
YourSmartWatch starts to charge and will stop automatically as soon as the battery is
fully charged.