T h e r most a tic v alv e o n ly • Te r m o s t á t i c o
English INSTALLATION INSTRUCTIONS Water Supply Recommended Maximum Minimum Hot Water Temperature 65 C° (~150F) 80 C° (~175F) 15 C° (~60F) Working Pressure 3 BAR (~45PSI) 5 BAR (~75PSI) 0.5 BAR (~7PSI) In case of pressures over 5 BAR (~75 PSI), we recommend to use a pressure reducer. Before proceeding with the assembly, purge the hot and cold water pipes so as to avoid the accumulation of dirt and impurities that could affect the function of the faucet. FIG. 01 Remove the protection covers (1.
English To replace the thermostatic cartridge (6.N), loosen the grub screw (6.B), remove the knob (6.A), slide off the plate (6.D) with the flat washer (6.C) and screw on the stop cocks (6.P) in clockwise direction using a screwdriver. To replace the thermostatic cartridge with the handle (6.E) follow the instructions given below: loosen the grub screw (6.O) and pull out the thermostatic cartridge with the handle (6.E). Fit the new assembly (6.
FIG. 01 FIG. 02 FIG. 03 FIG. 04 FIG. 05 FIG. 06 FIG.
FR2TCC959 FR2T-690CAN FRCA-952QSRN FR85-910TH/F FROR39,34X2,62 FR78-691THR FR85-959/910F
