Brochure

packardonline.com
|
800.334.1769
92
MOTORS
|
Features
• Used on many Sta-Rite, Red Jacket, Pac Fab, American Products
and Sears jet and pool pumps
• High and low service factors
• Open drip proof enclosure
• Sealed ball bearings
• CCW pump end rotation
• 303 Stainless steel threaded shaft
• 50ºC ambient
• Square ange mounting
• Capacitor start
• 3450 RPM
• Automatic overload
• 60 Hertz
• Single speed
• Single phase
Item ID H.P. Volts Max Amps Service Factor Frame Notes
Century Square Flange/High Service Factor (Full Rated)
SQ1032 1/3 115/230 9.90/5.00 1.95 48Y
SQ1052 1/2 115/230 13.40/6.70 1.90 48Y
SQ1072 3/4 115/230 15.30/7.60 1.65 48Y
QC1072 3/4 115/230 12.60/6.30 1.65 48Y
199
SQ1102 1 115/230 19.20/9.60 1.65 48Y
QC1102 1 115/208-230 16.00/8.00 1.65 48Y
199
SQ1152 1 1/2 230 10.40 1.47 48Y
199
SQ1202 2 230 11.20 1.30 48Y
199
SQ1302V1 3 230 15.40 1.15 56Y
199
Century Square Flange / Low Service Factor (Up-Rated)
USQ1052 1/2 115/230 9.90/5.00 1.30 48Y
USQ1072 3/4 115/230 13.40/6.70 1.27 48Y
USQ1102 1 115/230 15.30/7.60 1.25 48Y
USQ1152 1 1/2 115/230 19.20/9.60 1.10 48Y
USQ1202 2 230 10.40 1.10 48Y
199
USQ1252 2 1/2 230 11.20 1.00 48Y
199
Notes:
199. Energy efcient capacitor start, capacitor run Conservationist motor
Item ID H.P. Volts Max Amps Service Factor Frame Notes
Century NEMA C Face Pool Filter Motors
SK1052 1/2 115/230 10.60/5.30 1.60 56C
ST1052 1/2 115/230 11.00/5.50 1.60 56J
SK1072 3/4 115/230 14.60/7.30 1.50 56C
CK1072 3/4 115/230 11.00/5.50 1.50 56C
199
ST1072 3/4 115/230 15.00/7.50 1.50 56J
SK1102 1 115/230 17.00/8.50 1.50 56C
ST1102 1 115/230 18.60/9.30 1.50 56J
CT1102 1 115/230 13.60/6.80 1.40 56J
199
SK1152 1 1/2 115/230 19.40/9.70 1.30 56C
199
ST1152 1 1/2 115/208-230 19.60/10.40-9.80 1.50 56J
199
ST1202 2 208-230 12.60-11.40 1.30 56J
199
ST1302V1 3 208-230 14.50-13.80 1.15 56J
199
Notes:
199. Energy efcient capacitor start, capacitor run Conservationist motor
Square Flange Pool Pump Motors
NEMA C Face Pool Pump Motors
Total output (HP x service factor) of replacement motor must equal or exceed motor being replaced
Features
• Sealed ball bearings
• Sealed switch design
• 50ºC ambient
• 3450 RPM
• Not reversible
• CCWPE rotation
• “1081” Design
• 60 Hertz
• Single speed
• Single phase
• Capacitor start and capacitor start-capacitor run
• NEMA “56C” face mount
• 303 Stainless shaft (56J (threaded shaft) and 56C (keyed shaft))
• 304 Ball bearing on shaft end
• High service factor (full rated)
• Standard eciency and high eciency design (conservationist)
• Open drip proof enclosure
• Automatic overload
POOL PUMP