Brochure

packardonline.com
|
800.334.1769
112
MOTORS
|
Features
• Ball bearings, mechanically locked on shaft end (excludes 5K models)
• 1.15 Service Factor (except as noted)
• Class F insulation (except as noted)
• Rated 60/50 hertz, 190/380 or 380 volt, at next lower
horsepower (as noted)
• 56-145T frame motors accept brake kits
• UL recognized and CSA certied
Totally Enclosed (Four in One), C-Face Footed (Rigid and Removable Base)
2
Requires nameplate modification
Additional features for “Four-In-One” motors only:
• CR200 Corona resistant magnet wire
• Bolt-on, removable rigid base
• Suitable for horizontal and vertical mounting
• Will accept drip cover kits
Notes:
5. 56H, 143T, and 145T Combination Base with 12 mounting holes
6. Bolt-on removable base for footless mounting option
13. F1 Mounting only, cannot reassemble to F2
19. 1.25 Service Factor
20. 1.35 Service Factor
24. Motor will NOT accept a Brake kit
68. Rated 60/50 hertz, 190/380 or 380 volt at next lower horsepower
112. 1.40 Service Factor
N - Totally Enclosed, Non-Ventilated
Item ID HP RPM Volts Frame Overload Model No. F.L. Amps
Weight
(lbs.)
Shaft Dim.
(in.)
Length Less
Shaft (in.) Notes
Marathon
H204 1/12 1140 115 56CZ None 5KH32GN142 2.4 13 5/8 X 2 1/4 7.37
112
H206 1/8 1140 115 56CZ None 5KH36KN112 3.8 15 5/8 X 2 1/4 8.43
112
H208 1/6 1725 115 56CZ None 5KH32DN111 4.2 11 5/8 X 2 1/4 7.37
20
H209 1/6 1140 115 56CZ None 5KH37PN36 4 19 5/8 X 2 1/4 8.83
20
H212 1/4 1725 115 56CZ None 5KH33FN77 5.6 13 5/8 X 2 1/4 7.62
20
H223 1/4 1725/1140 115 56CZ None 5KH37PN40 4.2/2.7 20 5/8 X 2 1/4 8.83
20
H214 1/4 1140 115 56CZ None 5KH46MN6071 5.6 22 5/8 X 2 1/4 8.9
20
H217 1/3 1725 115 56CZ None 5KH35JN121 6.6 14 5/8 X 2 1/4 8
20
H225 1/3 1725/1140 115 56CZ None 5KH46MN3040 5.7/3.2 22 5/8 X 2 1/4 8.9
20
H290 1/2 1725 115 56CZ None 5KH36MN137 7.2 16 5/8 X 2 1/4 8.43
19
H226 1/2 1725/1140 115 56CZ None 5KH49PN3042 8.0/4.2 26 5/8 X 2 1/4 9.45
19
Features
• Split phase (except as noted)
• Thermal protection, as noted
• Service Factor, as noted
• Motors with 56CZ frames have 2-1/4 x 5/8 shaft dimensions
• Ball bearings
Single Phase, Drip Proof, C-Face Footless, Single Speed
Suitable for use on VFD per guidelines on page 120.
Item ID HP RPM Volts Frame
Four-In-
One Model No.
CT Speed
Range
2
Nom.
E. F.L. Amps
Weight
(lbs.)
Shaft Dim.
(in.)
Length Less
Shaft (in.) Notes
Marathon
K1322 1/3 1800 208-230/460 56C No 5K42FN4035 — 69.2 1.5-1.6/0.8 20 5/8 x 1 7/8 9.13
20, 24, 68
G581 1/2 1800 208-230/460 56C Yes 056T17F5321 10:1 68.0 2.3-2.4/1.2 23 5/8 x 1 7/8 9.93
6, 13, 68
G588 1/2 1200 208-230/460 56C Yes 056T11F5309 10:1 68.0 2.4-2.7/1.35 24 5/8 x 1 7/8 9.93
6, 13, 68
G582 3/4 1800 208-230/460 56C Yes 056T17F5322 10:1 75.5 2.6-3.0/1.5 24 5/8 x 1 7/8 9.93
6, 13, 68
G589 3/4 1200 208-230/460 56C Yes 056T11F5308 4:1 74.0 3.2-3.2/1.6 28 5/8 x 1 7/8 10.43
6, 13, 68
D393A 1 3600 208-230/460 56C Yes 056T34F99008 4:1 74.0 3.7-3.7/1.85 25
6, 13, 68
G583A 1 1800 208-230/460 56HC Yes 056T17F15639 10:1 77.0 3.5-3.6/1.8 26
5, 6, 13, 68
G584A 1 1/2 1800 208-230/460 56HC Yes 056T17F15641 10:1 86.5 4.6/2.3 45 5/8 x 1 7/8 12.78
6, 13, 68
G585A 2 1800 208-230/460 56HC Yes 056T17F15640 10:1 86.5 6.0/3.0 48 5/8 x 1 7/8 13.28
5, 6, 13, 68
Item ID HP RPM Volts Frame
Four-In-
One Model No.
CT Speed
Range
2
Nom.
E. F.L. Amps
Weight
(lbs.)
Shaft Dim.
(in.)
Length Less
Shaft (in.) Notes
Marathon
G580 1/3 1800 208-230/460 56C Yes 056T17T5305 1000:1 68.0 1.8-1.6/0.8 20 5/8 x 1 7/8 8.05
N, 6, 13, 24, 68
MARATHON GENERAL PURPOSE, THREE PHASE