Brochure

packardonline.com
|
800.334.1769
128
MOTORS
|
INV. DUTY (LEADTIME 2 DAYS)
Mod # Appl. Mtr. Type Mod
25 Variable Torque Any
Add thermostats,
re-nameplate
26
10:1 CT EPAct TEFC
Oversized fan,
20:1 CT NEMA Premium® TEFC
Add thermostats,
re-nameplate
43
10:1 CT EPAct TEFC Oversized fan,
20:1 CT NEMA Premium® TEFC re-nameplate
Operation of motor on VFD exempts motor from Epact mandated efficiency
levels.
Leads - MOD0, MOD9, and MOD33,
(Mult. Symbol S4)
All motors are provided with standard leads of ample length for easy
connection in the conduit box to the power leads. Lead size and material are
dependent upon the class of insulation system in the motor and the current
capacity required.
Reconnection - MOD9
Reconnect dual voltage 9-lead or 12-lead motors to a 3-lead single voltage.
Connection is made insided the motor frame. Specify desired voltage when
ordering. On single phase motors, specify rotation. Lead-time is 2 days.
*Part Winding Start and Star-delta connections are excluded.
Remark Leads - MOD33
Using cloth markers, remark leads with numbers or letters. Please specify
markings. Lead-time is 2 days.
Longer Leads - MOD0
Extend leads up to two feet longer than standard by splicing. Splice will
be visible in conduit box. Not available on explosion proof motors.
Lead-time is 2 days.
Mounting/Assembly - MOD1, and MOD39
(Mult. Symbol S4)
Motors listed are horizontal, foot mounted. Many stock motors can be
furnished in assembly positions as illustrated. Modification may include
repositioning of vents, baffles, drains, and conduit box. Also end brackets
are assembled and grease fittings are properly installed for operation with
the motor in the position shown. No attempt is made to locate fittings on
any particular side of the motor. Horizontal Ball bearing motor assemblies
W5, W6, W7,and W8 are not suitable for external thrusts in excess of rotor
weight and half-coupling. Cast Iron ODP and TEFC, 360 and larger, are not
suitable for vertical operation. Consult Engineering for TEFC Build Up.
Lead-time is 2 days.
Convert to Floor, Ceiling, or Wall Mount - MOD1
Convert standard F1 mount to F2, W1, W2, W3, W4, W5, W6, W7, W8, C1, or
C2 mount. The mounting symbol is required when ordering to indicate the
proper mounting.
Lead-time is 2 days.
Example: Motor will be modified F1 to wall mounting W3.
FLOOR MOUNTING ASSEMBLIES
CEILING MOUNTING ASSEMBLIES
WALL MOUNTING ASSEMBLIES
Adjustable Motor Bases - MOD39
Adjustable bases are a convenient means for adjusting belt tension or may
be used as mounting plates. Adjustable motor bases are bolted to fixed
base of motor prior to shipping. NEMA 215T and smaller bases feature one
adjusting screw. Bases on NEMA 254T and larger feature two adjusting
screws. Bases are not suitable for vertical mounting.
Lead-time is 2 days.
Nameplates / Markings - MOD7
(Mult. Symbol S4)
Nameplate material is mylar or stainless steel depending on motor design
and enclosure.
Additional Data on Nameplate
Motors can be re-nameplated for alternate ratings. Changes in horsepower,
altitude, ambient, voltage, frequency, etc. Lead-time is 1 day.
CE Mark
CE compliant mark can be provided for all non explosion proof NEMA frame
motors. Many stock motors already contain the CE mark. Lead-time is 2 days.
C-1 C-2
W-1 W-2 W-3 W-4
W-5 W-6 W-7 W-8
F-1 F-2
Marathon
Only
MARATHON ONLY MOTOR MODIFICATIONS