Brochure

packardonline.com
|
800.334.1769
68
MOTORS
|
Features
• Frame and shaft end bracket enclosed, except X011 and X012 have
open frames
• Single and multi-speed models as noted
• Ball bearings
• Weather resistant reversing plug
• 30” long leads
• Shaft with at, unless otherwise noted
• Shaft slinger
• 1-5/8” Extended thru-bolts on shaft end, except where noted
• Automatic reset thermal protector
• Lug mount kits and other accessories available
• UL recognized and CSA certied
• Capacitor not included
PSC, Open Air Over, Thru-Bolt, Shaft Up or Horizontal
Application
Direct drive condenser fans mounted vertically, shaft up. Models with open brackets should be mounted where they are shielded from rain. These
motors need to be mounted within the airow of the fan for proper cooling.
Item ID HP RPM Volts Frame Model No. Cap. Required
F.L.
Amps
Weight
(lbs.)
Frame
Length (in.)
Shaft Dim.
(in.)
Length Less
Shaft (in.) Notes
Marathon
X420 1/4 1625/1 460 48Y 48A17O169 5MFD / 370V 1.0 12 4 1/2 x 6 10.94
34
X423 1/4 1075/1 460 48Y 48A11O2055 5MFD / 370V 1.0 13 4 1/4 1/2 x 6 11.19
36
X213 1/4 1075/1 208-230 48Y 48A11O1524 7.5MFD / 370V 1.4-1.2 12 4 1/4 1/2 X 6 11.19
21
Item ID HP RPM Volts Frame Model No. Cap. Required
F.L.
Amps
Weight
(lbs.)
Frame
Length (in.)
Shaft Dim.
(in.)
Length Less
Shaft (in.) Notes
Marathon
X012 1/4 1625/1 208-230 48Y 48A17O2006 5MFD / 370V 1.9-1.8 12 4 1/2 1/2 x 6 5.00
30, 34, 44
X011 1/3 1625/3 208-230 48Y 48A17O2005 5MFD / 370V 2.3-2.3 14 4 3/4 1/2 x 6 11.75
30, 34, 44
Item ID HP RPM Volts Frame Model No. Cap. Required F.L. Amps
Weight
(lbs.)
Frame
Length (in.)
Shaft Dim.
(in.)
Length Less
Shaft (in.)
Marathon
X087 1/4 1075/1 208-230 48Y 48A11O2029 5MFD / 370V 2.0-2.0 12 4 1/4 1/2 x 6 11.19
Item ID HP RPM Volts Frame Model No. Cap. Required
F.L.
Amps
Weight
(lbs.)
Frame
Length (in.)
Shaft Dim.
(in.)
Length Less
Shaft (in.) Notes
Marathon
X278 1/8 825 208-230 48Y 048A8O206 5 MFD / 370V 0.9-0.9 11 4 1/4 1/2 x 4 3/4 4.31
37, 44
X216 1/5 1075 208-230 48Y 048A11O1097 5 MFD / 370V 1.8-1.6 10 3 3/4 1/2 x 6 3.81
37, 44, 60
X297 1/3 1075 208-230 48Y 048A11T509 5 MFD / 370V 1.8-1.8 12 4 1/4 1/2 x 3 3/4 4.31
N, 29, 41, 60
Notes:
21. Double shaft extension 1-1/2” long by 1/2” diameter with at each end
29. Weep holes with removable plugs on end brackets. Remove bottom plug after installation
30. Resilient ring mount, base not included
34. 1 ” thru-bolts, shaft end
36. 1-1/4” thru-bolts, shaft end
37. 1-1/2” thru-bolts, shaft end
41. 1/2” thru-bolts, opposite shaft end
44. 1” thru-bolts, opposite shaft end
60. Foot locating Set Screws on frame, 90 apart
N - Totally Enclosed, Non-Ventilated
Features
• Frame and opposite shaft end bracket are enclosed for vertical shaft
down mounting
• Weather resistant reversing plug
• 30” Long leads
• Shaft slinger
• 1-1/4” Extended thru-bolts on shaft end, except where noted
• Automatic reset thermal protector
• Ball bearings
• UL recognized and CSA certied
• Capacitor not included
PSC, Open Air Over, Thru-Bolt Mount, Shaft Down
Application
Direct drive condenser fans mounted vertically, shaft down. These motors need to be mounted within the airow of the fan for proper cooling.
MARATHON CONDENSER FAN/HEAT PUMP