User Manual

Press the light up button
Press the light up button
for fun phrases, songs
for fun phrases, songs
and sound effects!
• For best performance and longer battery life, we
recommend replacing the battery that came with this
toy with one, new AAA (LR03) alkaline battery.
• Loosen the screws in the vehicle bottom with
a Phillips screwdriver. Lift to remove the bottom
of the vehicle to access the battery compartment.
Remove the battery and properly dispose of it.
• Insert one, new AAA (LR03) alkaline battery.
Hint: We recommend using an alkaline battery for
longer battery life.
• Replace the vehicle bottom and tighten the
screws. Do not over-tighten.
• When sound/light from this product becomes faint
or stop, it’s time for an adult to change the battery.
• Wipe the toy with a clean, damp cloth. Do
not immerse.
• If this product begins to operate erratically, you
may need to reset the electronics. Remove the
battery and reinstall it.
CCR40
Requires one AAA battery
(included) for operation.
Battery included is for
demonstration purposes only.
Battery installation is required.
Only adults should install batteries.
Required tool: Phillips
screwdriver (not included).
Keep these instructions for
future reference as they
contain important information.
1,5V x 1
AAA (LR03)
Includes Speedway Sensor technology.
Use this car on the Puppy’s
Smart Stages™ Speedway (sold
separately and subject to availability)
and it recognizes and responds to it!