User's Manual

LAUNCH X-431Diagun User's Manual
DIAGUN CONNECTOR SERIAL NO.
DEALER CODE
Note:
1. ‘Diagun Connector Serial No.’ label is attached by manufacturer
before shipping.
2. Dealer should fill in the Dealer Code when selling the machine to
customer and stamp on the code.
3. The ‘Diagun Connector Serial No.’ and “Dealer Code” is useful
when updating the software. Refer to the section “Update of
Diagnostic Software”. Keep the user’s manual carefully.
4. Dealer should log on http://www.X431.com to fill in the Dealer
Code and other information in “Dealer administration” area when
a product is sold so that customer can do software updating.
Statement:
LAUNCH reserves the rights to make any change to product designs and
specifications without notice. The actual object may differ a little from the descriptions in the
manual in physical appearance, color and configuration. We have tried our best to make the
descriptions and illustrations in the manual as accurate as possible, and defects are inevitable, if
you have any question, please contact local dealer or after-sale service center of LAUNCH,
LAUNCH does not bear any responsibility arising from misunderstandings.