User Manual
Table Of Contents
- Copyright Information
- Trademark Information
- Precautions on using the tool
- Precautions on operating vehicle’s ECU
- 1 Introductions
- 2 Preparations
- 3 Network Setup
- 4 How To Diagnose
- 5 Special (Reset) Function
- 5.1 Oil Reset Service
- 5.2 Electronic Parking Brake Reset
- 5.3 Steering Angle Calibration
- 5.4 ABS Bleeding
- 5.5 Tire Pressure Monitor System Reset
- 5.6 Gear Learning
- 5.7 IMMO Service
- 5.8 Injector Coding
- 5.9 Battery Maintenance System Reset
- 5.10 Diesel Particulate Filter (DPF) Regeneration
- 5.11 Electronic Throttle Position Reset
- 6 Remote Diagnosis
- 7 Software Update
- 8 Maintenance Help
- 9 Personal Center
- 10 Others
- 11 FAQ
LAUNCH X-431 PROS MINI V3.0 User Manual
11
4 How To Diagnose
4.1 Diagnosis Flowchart
For new users, please follow the operation chart shown in Fig. 4-1 to get familiar
with and start using the tool.
Tap
“Diagnostic”
Select vehicle
Select test
system
Select test
function
Select diagnostic
software version
Tap “Login” to
register
Is Connector
Activated ?
No
Tap “Update” to
update software
Yes
…… (Refer to
Chapter 4.2)
Register &
Activate OK
Fig. 4-1
4.2 Initial Use
During initial use, tap the application icon on the home screen to launch it, some
illustrations that guide you through some of important operations appear. Scroll
the screen and tap on “Start Now” to enter the Job menu.
4.2.1 User registration
Tap “Login” on the upper right corner of the Job menu: