User Manual
Table Of Contents
- Copyright Information
- Trademark Information
- Precautions on using the tool
- Precautions on operating vehicle’s ECU
- 1 Introductions
- 2 Preparations
- 3 Network Setup
- 4 How To Diagnose
- 5 Special (Reset) Function
- 5.1 Oil Reset Service
- 5.2 Electronic Parking Brake Reset
- 5.3 Steering Angle Calibration
- 5.4 ABS Bleeding
- 5.5 Tire Pressure Monitor System Reset
- 5.6 Gear Learning
- 5.7 IMMO Service
- 5.8 Injector Coding
- 5.9 Battery Maintenance System Reset
- 5.10 Diesel Particulate Filter (DPF) Regeneration
- 5.11 Electronic Throttle Position Reset
- 6 Remote Diagnosis
- 7 Software Update
- 8 Maintenance Help
- 9 Personal Center
- 10 Others
- 11 FAQ
LAUNCH X-431 PROS MINI V3.0 User Manual
20
4.5 Start Diagnostics
Tap “Tradition Diagnose” to enter the vehicle selection page.
Tap a corresponding diagnostic software logo, and then follow the on-screen
instruction to access the diagnostic software.
Take Demo as an example to demonstrate how to diagnose a vehicle.
1. Tap “DEMO” to navigate to the version selection screen.
(Note: No
communication should be established for DEMO program.)
Fig. 4-14
On-screen Buttons:
Search BT:
Tap to search for the available VCI connector.
*Note: If a vehicle is tested and no communication setup is done before diagnosis, tap
“Search BT”. Tap “Scan” to start searching for the VCI. Once it is found, tap it to start
pairing. If the handset has paired with the VCI, it will enter Step 2 directly.
Submit:
Tap it to go to next step.
Update instruction:
Tap to view the optimized items and enhancements.