User Manual
Table Of Contents
- Copyright Information
- Trademark Information
- Precautions on using the tool
- Precautions on operating vehicle’s ECU
- 1 Introductions
- 2 Preparations
- 3 Network Setup
- 4 How To Diagnose
- 5 Special (Reset) Function
- 5.1 Oil Reset Service
- 5.2 Electronic Parking Brake Reset
- 5.3 Steering Angle Calibration
- 5.4 ABS Bleeding
- 5.5 Tire Pressure Monitor System Reset
- 5.6 Gear Learning
- 5.7 IMMO Service
- 5.8 Injector Coding
- 5.9 Battery Maintenance System Reset
- 5.10 Diesel Particulate Filter (DPF) Regeneration
- 5.11 Electronic Throttle Position Reset
- 6 Remote Diagnosis
- 7 Software Update
- 8 Maintenance Help
- 9 Personal Center
- 10 Others
- 11 FAQ
LAUNCH X-431 PROS MINI V3.0 User Manual
22
the electronic control units of the vehicle and generate a detailed report about
vehicle health.
Tap “Health Report”, the system start scanning the ECUs and the screen
displays as follows:
Fig. 4-16
In Fig. 4-16, the tested system with fault code appears in red and the system
with OK displays in black (normally).
On-screen Buttons:
Print:
Tap to print the current screen. To perform printing, you need to purchase
an extra mini printer manufactured by LAUNCH separately and then properly
configure the wireless printer following the steps described in Chapter 9.10.3.
Clear DTC:
Tap to clear the existing diagnostic trouble codes.
Fault Report:
Tap to view the health report in details.