User Manual

14
LAUNCH Creader Professional CRP12X Series User's Manual
Press [ ] to cancel; press [ ] to exit diagnostic function.
5.1.2 Erase Codes
Select [Erase Codes], the screen will display the interface as shown below:
Figure 5-11
Press [
] to cancel; press [ ] to erase DTC’s, and the screen will display the
interface as shown in Figure 5-12:
Figure 5-12
According to the above gure, press [
] to clear the DTC. If successful, gure
5-13 will appear on the screen.
Figure 5-13
Notes:
Before performing this function, make sure to retrieve and record the trouble •