User Manual
22
LAUNCH Creader Professional CRP12X Series User's Manual
as VIN (Vehicle identication Number), CID (Calibration ID) and CVN (Calibration
verication number), as shown below:
Figure 5-27
Press [
] to return to Diagnostic Menu.
5.2 System Diagnosing (Only applies to CRP122/CRP123-EU/
CRP123-US/CRP123-AP/CRP129)
This function is specially designed to diagnose electronic control system of
single vehicle model which includes the following systems:
ENG (Engine)•
ABS (Anti-lock Brake System)•
TCM (Transmission Control Module)•
SRS (Supplemental Restraint System)•
Notes:
Before diagnosing, please make sure the diagnostic program corresponding •
to certain vehicle model has been installed on your CRP12X (except for
CRP121).
While performing system diagnosis, CRP123-EU/CRP123-US/CRP123-AP/•
CRP129 features Read datastream, whereas CRP122 does not support it.
For vehicles manufactured by different vendors, it is possible that it has •
different diagnostic menus. For details, please follow the instructions on the
screen to proceed.
In main menu, select [Diagnose] and press [
] to confirm, the screen will
display as gure 5-28.