User Manual

35
LAUNCH Creader Professional CRP12X Series User's Manual
8.3 Fill in Product Information
Figure 8-5
Choose the desired product type from the pull-down list. The serial No. and
register password can be found from the [Tool Information] in “Help” (See
Chapter 7. Help). Dealer code can be obtained from dealer.
After the information is lled, click “Submit” to register your product.
Note: If the lled serial No. or registration No. is invalid, the screen will display a
wrong message. Click “OK” button to return to the previous interface to re-ll the
correct numbers.
8.4 Software Download
Note: Only the registered user can download and update the software.
Click [Download center] to enter download center page after logging in
successfully.
Notes:
1. Software update of charge free will be provided by LAUNCH for one year.
The free period is from the registration date on the website, not the purchase
date. That is, during one year after the registration, users could download the
corresponding software for free.
2. If there is not the latest version in the download center or the latest
version can not meet the needs of the users as they are released by other
companies, users could buy the version in the purchase center or in the
update center (see “Purchase Software”). In the purchase center, users can
buy the software that doesn’t install in the download center. In the update
center, users can buy the software that is beyond the free download period.