User Manual
v
LAUNCH Creader Professional CRP12X Series User's Manual
General Notice
Other product names used herein are for identification purposes only and •
may be trademarks of their respective owners. LAUNCH disclaims any and all
rights in those marks.
There is a possibility that this unit is inapplicable to some of the vehicle •
models or systems listed in the diagnosis section due to different countries,
areas, and/or years. Do not hesitate to contact LAUNCH if you come across
such questions. We are to help you solve the problem as soon as possible.
Disclaimer
To take full advantage of the unit, you should be familiar with the engine.•
All information, illustrations, and specications contained in this manual are •
based on the latest information available at the time of publication. The right
is reserved to make change at any time without notice.
Neither LAUNCH nor its afliates shall be liable to the purchaser of this unit •
or third parties for damages, losses, costs or expenses incurred by purchaser
or third parties as a result of: accident, misuse, or abuse of this unit, or
unauthorized modifications, repairs, or alterations to this unit, or failure to
strictly comply with LAUNCH operating and maintenance instructions.
LAUNCH shall not be liable for any damages or problems arising from the •
use of any options or any consumable products other than those designated
as Original LAUNCH Products or LAUNCH Approved Products by LAUNCH.
Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the CRP12X, please
read this user’s manual first carefully and observe the following safety
precautions at a minimum whenever working on a vehicle:
Always perform automotive testing in a safe environment.•
Do not attempt to operate or observe the tool while driving a vehicle. •
Operating or observing the tool will cause driver distraction and could cause a
fatal accident.
Wear safety eye protection that meets ANSI standards.•
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or •
hot engine parts.
Operate the vehicle in a well-ventilated work area: Exhaust gases are •
poisonous.
Put blocks in front of the drive wheels and never leave the vehicle unattended •
while running tests.
Use extreme caution when working around the ignition coil, distributor cap, •
ignition wires and spark plugs. These components create hazardous voltages
when the engine is running.