User's Manual
23
LAUNCH Battery 5001 User Manual
6.2 System Diagnosing
This function is specially designed to diagnose electronic control systems of
single vehicle model.
The following vehicle systems are supported:
• ABS (Anti-lock Braking System)
• SRS (Supplemental Inatable Restraint System)
• AT (Automatic Transmission)
• Engine
6.2.1 Smart Diagnosis (Auto-Detect)
After connection, turn the ignition key on and the system enters auto-detect
mode
(
Note: Please make sure the “Automatic detection on connect” in “Settings” is
set as ON).
Note: To detect more and accurate VINs, a stable network connection is highly
recommended for this function.
CAUTION: Don’t connect or disconnect any test equipment with ignition on or
engine running.
A. Once the system successfully obtains the VIN (Vehicle Identication Number)
information of the currently identified vehicle, it will continue scanning the
vehicle systems. After the scanning is complete, a diagnostic report will be
automatically generated in the Settings -> Data -> Diagnostic Report.
B. If the tool failed to access the VIN information, the following popup will appear
on the screen: