Manualshelf

User Manual

ManualsBrandsLAUNCH ManualsAutomotiveScanner CRP909X, 2021 New OE-Level Full System Scan Tool 16 Reset IMMO Auto VIN Android 7.1, ABS Bleeding Oil Reset, SAS EPB Diagnostic Scanner One-Click Free Update, EL-50448 TPMS Tool as Gift
21222324252627282930
21
LAUNCH
Professional 909X User Manual
4. Initial Use
4.1 Charging the Tool
There are two charging methods available:
Via Charging Cable: Plug one end of the included charging cable into the DC-IN
port of the tool, and the other end to the external DC power.
Via Diagnostic Cable: Insert one end of the diagnostic cable into the DB-15
connector of the tool, and the other end to the vehicle’s DLC.
Once the charging LED illuminates solid green, it indicates that the battery is
fully charged.
4.2 Getting Started
If it is the first time you have used this tool, you need to make some system
settings.
1. Press the [Power] button to power it on.
2. The screen displays a welcome page. Tap “Start” to go to next step.
3. Choose the desired system language, and tap “OK” to conrm.
Figure 4-1
4. Choose the desired time zone, and tap “Next” to enter the WLAN setup page.
5. Slide the switch to ON, the system starts searching for all available wireless
LANs. Choose the desired WLAN access point / network,