CC lead@r expressionist 128% Quick Start Guide Eo 08-15 Diagnostic Connector 5" Touch Serene {To connect to vehicle's DLT (Data ink Connector} vin diagnostic cable } Selection Buttons . Overpowering Lock Button 5v Charging Port HOME Outta © {5 Return Button oe a Tare are two charging methods available: Via Charging Cable: Plug one ond of the incited charging cable nie the 5V charging port of the tool, and the other end to the external DIG power.
© eh a mainly includes the following function modules: 1. Tara the ignition off. 3 ) 2. Locate vehicle's DLC: It Diagnose 10 configure the look fo operate us a professional provides standard 16 pins diagnostic tool.
5 Starr Diagnostics Auto Detect and manual diagnosis are supported. if the Auto Detect tats, you can chose to input the VIN manually or exit ihe Autodidact & ion to switch to manual diagnosis mode. “Note: If 'Automatic detection on connect? in “Settings” is set as ON, this step can be ignored, -. Tap “Diagnose™ | Start decoding vehicle VIN Desalinizing OK § ¥ wck vehicle info.
Le Here we |i 5 fool, G1: There is na response when communicating with on-board computer, A: Please confirm the proper voltage of power supply and check if the throttle has been closed, the transmission is in the viral position, and the water is in proper temperature, ore frequently asked questions and answers related to Gr: What ta do If the system fails to slat auto VIN selection? A: Pleas 1. Whether the tool is propped connected to the vehicle's DLL. 2.