User's Manual

LAUNCHLAUNCH
24 25
www.x431.com [phone] www.x431.com [phone]
4) Datastream Units
Set the measurement units of the datastream items (Metric or Imperial).
5) Auto Power O󰀨
This option enables you to set the time to turn o󰀨 the tool automatically after
not being operated.
If the “Disable” option is selected, it will disable this auto power-o󰀨 function.
6) Beeper
Turn the buzzer to On/O󰀨.
7) Region
Set the desired vehicle region when accessing the TPMS module.
8) Language
Congure the system language of the tool to your preference language.
Icon Descriptions
The memory card is ejected or removed from the memory
card slot.
It appears when the tool is connected to the vehicle’s
DLC port via the diagnostic cable.
It appears when the tool is connected to the PC via the
charging cable.
Battery level indicator
4.3 Settings
Select
on the main menu screen and press [OK], the system will enter the
following screen:
Figure 4-2
1) Sensor Pressure Units
Set the air pressure units of the sensors (kPa, PSI or Bar).
2) Sensor Temperature Units
Set the temperature units of the sensors (C° or F°).
3) ID Format
Change the format of the sensor ID display (Auto, Decimal or Hexadecimal).