User's Manual

LAUNCHLAUNCH
28 29
www.x431.com [phone] www.x431.com [phone]
1. Select CHECK SENSOR and press the OK button to enter the following
screen.
Figure 5-5
2. For universal sensors, place the tool alongside the valve stem, point toward
the sensor location, and press the
button.
Figure 5-6
Notes:
1. For early magnet-acvated sensors, place the magnet over the stem and then
place the tool alongside the valve stem.
2. If the TPMS sensor requires re deaon (of the order of 10PSI), then deate
the re and place the tool alongside the stem while pressing the
buon.
Figure 5-3 (Select 2014~2018)
4. Select 2014~2018 and press the OK button to enter the TPMS function
selection screen.
Figure 5-4
Note: For indirect TPMS vehicle, only the Learning funcon is supported. For
vehicle using Direct TPMS, it generally includes: Activation, Programming and
Relearning. The available TPMS functions may vary for different vehicles being
serviced.
5.1 Check Sensor
This function allows users to activate TPMS sensor to view sensor data
such as sensor ID, tire pressure, tire frequency, tire temperature and battery
condition.