User's Manual

LAUNCHLAUNCH
34 35
www.x431.com [phone] www.x431.com [phone]
Figure 5-17
After the sensor is successfully programmed, the following screen will appear.
Figure 5-18
Press the
button to return to the previous screen. Press the OK button to
continue programming other sensors.
Notes:
1. If a random ID is entered, please perform the TPMS Relearn function after
programming is finished. If the original ID is entered, there is no need to
perform Relearn funcon.
2. If a vehicle does not support relearn funcon, please select the Manual Input
opon to enter the original sensor ID manually, or trigger the original sensor at
the acvaon screen to get its informaon, before programming the LAUNCH-
sensor.
Use the on-screen virtual keypad to input a random or original (if available)
sensor ID and press OK.
Figure 5-15
Note: Do not enter the same ID for each sensor.
Select the wheel which needs to be programmed on the tool, place a
LAUNCH-sensor close to the TPMS antenna of the tool. Press the OK button
to start writing the new sensor ID to the LAUNCH-sensor.
Figure 5-16
A progress bar will appear on the screen indicating the programming process.