User's Manual

LAUNCH X-431 PRO3 V5.0 User Manual

2 Preparations

2.1 Charging the Tablet

1. Plug one end of the included charging port of the tool, and the other end to

the power adaptor.

2. Connect the other end to the AC outlet.

If appears on the screen, it indicates it is being charged. If the logo changes

into , it indicates that the battery is fully charged. Unplug the power adaptor

from the tablet.

*Notes:

 If the battery remains unused for a long period of time or the battery is completely

discharged, it is normal that the tool will not power on while being charged. Please

charge it for a period of 5 minutes and then turn it on.

 Please use the included power adaptor to charge your tool. No responsibility can be

assumed for any damage or loss caused as a result of using power adaptors other than

the one supplied.

 While the tablet has low battery, a beep will sound. If it is very low, the tablet will be

switched off automatically.

2.3 Power on/off

2.3.1 Power on

Press [POWER] to turn the tool on.

*Note: If it is the first time you have used this tool or the tool remains idle for a long

period of time, the tool could fail to turn on. Please charge the tool for a minimum of 5

minutes and attempt to turn on again.

2.3.2 Power off

Press [POWER] for 3 seconds, an option menu will pop up on the screen. Tap

“Power off” to turn the tool off.