User Manual

LAUNCH

CReader Series English User’s Manual

8. FAQ

Here we list some frequently asked questions and answers relating to the tool.

Question: System halts when reading data stream. What is the reason?

Answer: It may be caused by a slackened connector. Please turn off the tool,

firmly connect the connector, and switch it on again.

Question: Screen of main unit flashes at engine ignition start.

Answer: Caused by electromagnetic disturbing, and this is normal phenomenon.

Question: There is no response when communicating with on-board computer.

Answer: Please confirm the proper voltage of power supply and check if the

throttle has been closed, the transmission is in the neutral position, and the water

is in proper temperature.

Question: Why are there so many fault codes?

Answer: Usually, it’s caused by poor connection or fault circuit grounding.