User Manual

FRESDEITPTRUJPTC EN

IMPORTANT: Read the instruction carefully and use the unit

properly before operating. Failure to do so may cause damage

and/or personal injury, which will void the product warranty.

1. Charging & Turning On

1. Use the included power adaptor to charge the tablet.

2. After charging is complete, press the POWER button to turn

the tablet on. The system starts initializing and then enters the

home screen.

Warning: Please use the included power adaptor to charge your tool.

No responsibility can be assumed for any damage or loss caused as a

result of using power adaptors other than the one supplied.

2. Language Setting

The tool supports multiple system languages. To change the

language of the tool, please do the following:

1. On the home screen, tap “Settings” -> “System” -> “Language

& input” -> “Languages”.

2. Tap “Add a language”, and then choose the desired language

from the list.

3. Tap and hold the desired language and drag it to the top of

the screen and then release it, the system will change into the

target language.

3. WLAN Setup

Once you’re online, you can register your tool, update the

diagnostic software and APK, surf the Internet and send email on

your network. Follow the steps below to proceed:

1. On the home screen, tap “Settings” -> “Network & internet” ->

“WLAN”.

2. The tablet will start searching for all available wireless networks.

Select the desired Wi-Fi connection from the list (Password

may be required for secured networks).

3. When Connected appears, it indicates that it is properly

connected to the network.

4. Register & Update

Follow the steps below to proceed registration and update:

4.1. Register

1). Launch app: Tap the application icon on the home screen, and

then tap “Login” on the upper right corner of the screen. The

following screen will appear.

2). Create an App Account: Tap “New Registration”, input the

information (items with * must be lled) and then tap “Register”.