User Manual

3
FRESDEITPTRUJPTC EN
VCI Device OBD I Adaptor
Diagnostic
Cable
Non-16pin ConnectorTo Vehicle's DLC
*Note: If the pin of the DLC is damaged or has insucient power, you
can get power via either of the following methods:
A. Via Battery Clamps Cable (optional):
VCI Device OBD I Adaptor
Diagnostic
Cable
Non-16pin Connector
Battery Clamps Cable
To Vehicle's DLC
To Vehicle's Battery
B. Cigarette Lighter Cable (optional):
VCI Device OBD I Adaptor
Diagnostic
Cable
Non-16pin Connector
Cigarette Lighter Cable
To Vehicle's DLC
To Cigarette Lighter
Receptacle
If you choose to perform vehicle diagnosis via data cable, connect
one end of the data cable into the VCI, and the other end into the
USB port of the tablet.
5.2 Vehicle Connection (Only For Commercial Vehicle /
Diesel & Gas Vehicle Edition)
1. OBD II Vehicle Connection
Use the diagnostic cable to connect the VCI to vehicle’s DLC port.
2. Non-OBD II Vehicle Connection
For commercial vehicles, choose any one of the following
connection methods to proceed:
VCI Device
Battery Clamps Cable
Cigarette Lighter Cable
Power Adaptor
Diagnostic Cable Non-16pin Connector*
To Vehicle's DLC
To Vehicle's Battery
To Cigarette Lighter
Recptable
To AC Outlet
A
B
C
*Note: For passenger vehicles, replace the “Non-16pin connector” with
“OBD I adaptor” + “non-16pin connector(for passenger vehicle)”. Other
connections shall also apply.