User Manual
4
EN FR ES DE IT PT RU JP TC
6. Start Diagnostics
Three diagnostic methods are available:
• Intelligent Diagnostics:
The system will automatically guide you directly to the x and
help you eliminate guesswork, without step-by-step manual
menu selection.
• Local Diagnostics:
You need to manually select the menu-driven command.
• Remote Diagnostics:
This helps repair shops or mechanics to diagnose a remote
vehicle, and launch instant messages, allowing for improved
eciency and faster repairs.
For new users, the Local Diagnostics is recommended as follows:
Select vehicle model
Tap "Local Diagnose"
Select software version
Select test system
Select test function
7. System Data Backup
There are two USB ports available on this tool: USB Type A and
USB Type C. The former is reserved for external USB storage
device and the latter is used with PC when performing system
data backup. It is strongly recommended to use the USB Type C
interface for this operation.
A. If exchanging data with an external USB storage device,
1. Plug the USB storage device into the USB Type A interface.
2. Swipe the screen from the top to select the USB drive.
3. Now you can exchange the data with the USB storage device.
B. If exchanging data with a PC,
1. On the home screen, tap “Settings” -> “USB Management”.
Slide the USB Switch to OFF to enable the USB Type C
interface.
Note: By default, the USB Switch is set as ON. In this case, the USB
Type C interface is only for charging and disabled for data exchange.
2. Plug the Type C end of the included data cable into the Type C
port of the tool, and the other end to the USB port of the PC.
3. After the PC successfully identies the tool, you can perform
data backup.
Note: Pictures illustrated here are for reference purpose only. Due to
continuing improvements, actual product may dier slightly from the
product described herein and this Quick Start Guide is subject to change
without notice. For more detailed operations, please refer to the In-App
User Manual.