TOUCH PRO ELITE Quick Start Guide Fra Gist ass in Crossings on el BB-15 Agnosticism Connector §" Touch Bearer {To connect to vehicle's DLC (Data Link Connector) via diagnostic cable.) Selection Bunions BY Charging Port Powerlessness Lock Bitten {To connect to external BC power for charging the tool.
faintly includes the following function modules: To configure the look to operate as a professional a 1. Turn the Ignition off, 2. Kilowatts vehicle's DLC: It provides standard 16 ping In case no DLC is found, please refer io Automobile Repair Manual, 3. Plug one end of the diagnostic cable Info the DB-15 connector of the tool, and tighten the captive screws.
a Autodidact and manual diagnosis ars supported. [{ the Autodidact fails, you orn choose to input the VIN manually or exit the Auto Detest session to switch to manual diagnosis mode. Note: If "Automatic detention an consent” in "Settings" is set ss ON, his stop can be ignored. mind Anus! Diagnosis Fingertip = = If you are fresh to vehicle Tap "Diagnose diagnostics, you are suggested ; to use "DEMO" to get familiar with the diagnostic process.
rl Sp a Here we list some frequently asked questions and answers related to this tool. {3: Thea Is no responds when communicating with on-board computer. A: Please confirm the proper voltage of power supply and check if the throttle has been closed, the transmission is In the neutral antipasti, and the water is in proper temperature. 4: What to do If the system falls to start auto VIN detraction? A: Plazas check the following possible reasons: 4. Whether the look is properly connected to the vehicle's DLE.
