User Manual
23
LAUNCH
TOUCH PRO ELITE User Manual
4.3 Job Menu
It mainly includes the following function modules.
Figure 4-3
Diagnose
To congures the tool to operate as a professional diagnostic
tool.
I/M
A quick access to the I/M Readiness function of OBD II
Diagnosis. I/M refers to Inspection and Maintenance that
is legislated by the Government to meet federal clean-air
standards. I/M Readiness indicates whether or not the various
emissions-related systems on the vehicle are operating
properly and are ready for Inspection and Maintenance testing.
Note: This function also can be done by performing "OBD II" ->
"I/M Readiness". For detailed operation, please refer to Chapter 5.3.
OBD II
This option presents a quick way to check for DTCs, isolate
the cause of the illuminated Malfunction Indicator Lamp (MIL),
check monitor status prior to emissions certification testing,
verify repairs, and perform a number of other services that are
emission-related.
Reset
To perform common repair & maintenance items, including Oil
Lamp Reset, Steering Angle Sensor (SAS) Reset, Electronic
Parking Brake (EPB), Battery Maintenance System (BMS) Re-
set, Diesel Particulate Filter (DPF), Electronic Throttle Position
Reset, ABS bleeding.
Battery
Voltage
Performs a check of the vehicle’s battery to ensure the system
is operating within acceptable limits.