User Guide

ManualsBrandsLAUNCH ManualsAutomotiveX431 Creader VII+ Car Code Reader EOBD, OBD2 Scanner Scan Tool Testing Engine/Transmission/ABS/ Airbag System Update via PC

LAUNCH CReader VII+ Upgrade Process

Notes: There are 2 methods to upgrade the Creader VII+ scan tool, we

would recommend method 2(Via TF card) which is easier than the

method 1( Via USB Cable).

Step 1: Before starting the upgrade, please connect a computer to this device

via its USB, enter the device’s screen menu "Help --> Tool Information -->

supports WIN XP, 7, 8,10 laptop.)

Summary of content (6 pages)

PAGE 1
LAUNCH CReader VII+ Upgrade Process Notes: There are 2 methods to upgrade the Creader VII+ scan tool, we would recommend method 2(Via TF card) which is easier than the method 1( Via USB Cable). Step 1: Before starting the upgrade, please connect a computer to this device via its USB, enter the device’s screen menu "Help --> Tool Information --> Register Code" and take a photo to record the information displayed. (It supports WIN XP, 7, 8,10 laptop.
PAGE 2
Step 2: Go to the the Creader VII+ product page on the official website of LAUNCH and click “Updating Tool Download” icon. The path is as follows: https://eninfo.x431.com/prod_view.aspx?TypeId=68&Id=193&FId=t3:68:3 (NOTE: Our website is safe, please rest assured to enter in!) Step 3: Download the (Creader_Series_Setup_V1_08_004_EN.rar) and extract it to (Creader_Series_Update.
PAGE 3
Step 4: Click the (Creader_Series_Update.exe) file and install the updating tool.
PAGE 4
Step 5: Please try to find this software on your computer and open client software “Creader Series Update”. (NOTE: Our Setup is safe, please rest assured to install!) Step 6: When you see this page, insert the TF card into its reader, then contact the TF card reader to your PC port, type in the "Serial Number" which is located on the back of the VII+ device.
PAGE 5
Step 7: Hit [Device Upgrade] and move to the register page, type your email address and Register Code (check the Register Code on the picture you have taken before.), then hit [Submit]. Note: "Register Code" is equal to "user password",you don’t need to create any password by yourself. Step 8: Choose “Select All” and click [Download] to start downloading.
PAGE 6
Step 9: Once all steps are complete, reinsert the TF card into the tool and power the tool via USB in computer or via OBD2 port in vehicle. The tool will prompt you to upgrade, select OK button on tool to proceed. Step 10: The upgrade process is now complete! Note: Finally, if you have any question, please do not hesitate to contact us via our email and please be assured that we will be here to help you.