User Manual
LAUNCH X-431 PAD V User Manual
29
the firewall under the hood.
• Tap
to switch the display mode of the screen.
• Tap
to turn the camera flash on.
• Tap
to choose it from the record list if the VIN of the vehicle has
been scanned before.
• Tap
to input the VIN manually if the tablet has failed to identify the
VIN of the vehicle.
• Tap
to scan the VIN barcode. If the VIN barcode cannot be
recognized, please manually input the VIN.
• Tap to scan the VIN character. If the VIN character cannot be
recognized, please manually input the VIN.
*Note: In general, vehicle identification numbers are standardized - all contain
17 characters. VIN characters may be capital letters A through Z and numbers 1
through 0; however, the letters I, O and Q are never used in order to avoid
mistakes of misreading. No signs or spaces are allowed in the VIN.
After scanning, the screen automatically displays the result.
• If the VIN scanned is incorrect, tap the result field to modify it and then
tap
OK
.
• To scan it again, tap
REPEAT
.
If the VIN exists on the remote server, the system will enter the diagnostic
function selection screen.