User Manual

LAUNCH X-431 PAD V User Manual
54
Tap
Clear
to delete all the partner’s dialog logs.
Tap
Close
to close the current dialog.
5.3.4 Launch remote diagnosis (Device-To-Device)
The tool is allowed to initiate remote diagnosis with other diagnostic tools
(including but not limited to the X-431 PAD V of Launch family, which are
equipped with this module.
* Note: Before performing this operation, please make sure the following no matter
which side sends the remote request:
y Turn on the vehicle power supply.
y Throttle should be in a closed position.
y The tool should be properly connected to the vehicle’s DLC and a successful
communication is required.
On the function option selection screen, tap
Remote Diagnostic
, the following
screen will appear:
These options are defined as follows:
Actions Results
Request control
remote device
Request to control the partner’s device remotely to
help him diagnose the vehicle.
*Notes:
y Remote diagnosis has the same diagnostic steps as
manual diagnosis.
y In process of remote diagnosis, tap the
button to
send a voice message.
y Once vehicle diagnosis is complete, a report will be
created. Input your comments on this report, and then
tap Send Report to send it to the partner.