User's Manual

LAUNCH

X-431 PRO V4.0 User Manual

ig. 4-11

3. Choose one of the two ways to obtain power from:

A. Power adaptor: Connect one end of the included power adaptor to

arging port of the tablet, and the other end to AC outlet.

B. Internal battery pack

For non-OBDII vehicle, proceed as follows:

1. Locate vehicle’s DLC socket.

2. Select the corresponding non-16pin connector.

3. Plug the non-16pin end of the connector into the DLC socket, then connect

e other end to the OBD I adaptor, and then tighten the captive screws.

4. Connect the other end of the adaptor to the included VCI device.

5. To supply power to OBD I adaptor from:

A. Cigarette Lighter cable (optional): Connect one end of the cigarette lighte

ble to vehicle’s cigarette lighter receptacle, and the other end to the powe

jack of OBD I adaptor.

ig. 4-12

B. Battery Clamps Cable: Connect one end of the battery clamps cable to

ehicle’s battery, and the other end to the power jack of OBD I adaptor.

Fig. 4-13