Installation Guide

TLT240SC Two-post User’

s Manual

Diagram of hydraulic line of clear-floor 2-post lift

7. Storage and Scrap

7.1 Storage

When the equipment requires long-time storage:

 Disconnect the power supply

 Lubricate all the parts requiring lubrication: mobile

contact surface of the carriage, etc.

 Empty all the oil/liquid storage units

 Put the plastic cover over the equipment for dust

protection

7.2 Scrap

When the equipment service life is expired and can no

longer be used, disconnect the power supply, and properly

dispose of as per relevant local regulations.

Tools for Installation and

Adjustment

To ensure proper installation and adjustment, please

prepare the following tools:

：

Tool Model

Leveling instrument Carpentry type

Chalk line Min 4.5m

Hammer 1.5kg

Medium crescent wrench 40mm

Open-end wrench set 11mm-23mm

Ratchet socket set

Flat Screw driver 150mm

Rotary hammer drill 20mm

Concrete drill-bit

￠

19mm

9. Unpacking

Open the packing box: remove the packing materials and

inspect the lift for any sign of shipment damage. Check by

packing list to see if the main parts and accessories are

complete.

Keep the packing materials away from the children to avoid

danger: if the packing materials cause the pollution, they

shall be treated properly.

JB/T982-77 seal gasket 14