Installation Guide

TLT240SC Two-post User’
s Manual
16
3
Bushing Ⅰ 103203324
2
4
Cotter Pin 5 × 40
103060349
4
5
Returning ring 25 103050035
4
Symmetric Pulley installation Continued…
The photos below illustrate the proper alignment and placement of the pulleys (sheaves) into the overhead beam. Note that
both pulleys are positioned on the overhead beam sharing a common axle and the axle is positioned in the inner most axle
holes and that is closest to inner most area of the overhead beam. Install both sets of pulleys on each end of the over beam
to exactly match each other.