Installation Guide

TLT240SC Two-post User’

s Manual

symmetric top beam as shown:

Position the offside column at the designated chalk location.

Lift the top beam to its high position, and use four M12

bolts, washers and lock nuts to fix it with the columns (as

shown in Fig.12). When installing the top beam, ensure the

above micro switch support bracket adjacent to the power

side column. In Fig12:The symmetric top pulleys are to be

installed at position 1

、

1″,asymmetric top pulleys are to be

installed at position 2

、

2″.

Note:

 Since the offside column is not fixed to the ground,

you must operate carefully to avoid the falling of

the column.

Fig. 12