Installation Guide

TLT240SC Two-post User’
s Manual
1
1. Outline
1.1
1.1 1.1
1.1 Model Description
Model Description
TLT240SC clear-floor 2-post lift
4.0 T clear-floor 2-post lift (Fig.1 、 Fig.2 、 Fig.3)
1.2 Purpose
This machine is applicable for the lifting of various small
and medium-sized vehicles with total weight below 4.0t in
garage and workshop.
1.3 Functions and Features
 The cable and oil pipe are fully concealed, with
decent and elegant appearance.
 Designed based on the international standard,
meeting the demand of the garage and workshop.
 Top limit switch, effectively protecting the vehicle
from overhead collision.
 Dual hydraulic cylinders drive, stable lifting and
lowering.
 Manual lowering, safe and simple in operation.
 Adopt two steel cables for equalization, force two
carriages to move synchronously, and effectively
prevent the vehicle from tilting.
 Lowest height of lifting pad is 110mm, good for
repairing low chassis or low profile car.
1.4 Technical Specifications
Noise:
Working noise: ≤ 75dB （ A ）
Power unit:
Working pressure: 18 MPa
Basic parameters of the equipment:
Model
Rated
load
Lifting
height
Rising
time
Descending
time
Net
weight
Passing
width
Machine
width
Machine
height
TLT240SC
( Symmetric
installation ) 4000 kg
9000 lb
1850 mm
72.8 in
≤ 50s
≥ 20s
≤ 40s
690kg
1521 lb
2486 mm
97.9 in
3420 mm
134.6 in
3840
mm
151.2 in
TLT240SC
(Asymmetric
installation)
2415 mm
95.1 in
3563mm
140.3 in
TLT240SC ： When top beam are assembled by interior and exterior beam ，the width is adjustable, can
be narrowed another 150mm (5.9") than the normal setup
TLT240SC ： Optional Low Height set-up by 300mm (11.8") available. Special length Cables & Hose
required. Refer to Parts List. Call Dealer for purchase details.
Electrical parameters of the machine ：
：：
：
Motor :
Single phase: 220V/60Hz 2.2 kW