User Guide
Vehicle Connection
3
1. OBD II Vehicle Connection
1. OBD II Vehicle Connection
2. Non-OBD II Vehicle Connection
2. Non-OBD II Vehicle Connection
Start Diagnostics
4
VCI
OBD I Adaptor
To Vehicle’s DLC Port
Non-16pin Connector
Cigarette Lighter CableTo Cigarette Lighter Receptacle
Battery Clamps CableTo Vehicle's Battery
Quick Start Guide (EN)
LAUNCH
Three diagnostic methods are available:
Intelligent Diagnostics:
The system will automatically guide you directly to the fix and help you eliminate
guesswork, without step-by-step manual menu selection.
Local Diagnostics:
You need to manually select the menu-driven command.
Remote Diagnostics:
This helps repair shops or mechanics to diagnose a remote vehicle, and launch instant
messages, allowing for improved efficiency and faster repairs.
For new users, the Local Diagnostics is recommended as follows:
Preparation
s The ignition is turned on.
s The vehicle battery voltage is 9-14 volts or 18~30 volts.
s The throttle is in the closed position.
Tap Local Diagnostics
Select vehicle software
Select software version
Select vehicle system
Select diagnostic function
B
A
Directly plug the VCI into vehicle’s DLC port or use the OBD II extension cable to
connect the VCI to the vehicle’s DLC port.
Use the diagnostic cable to connect the VCI device to the vehicle’s DLC port.
B For Commercial Vehicle Edition/ Diesel & Gas Vehicle Edition
VCI
Diagnostic Cable
To vehicle’s DLC
Non-16pin Connector*
To AC Outlet
To Cigarette Lighter Receptacle
To Vehicle’s Battery
Power Adaptor
Cigarette Lighter
Battery Clamps Cable
A
B
C
*Note: Pictures illustrated here are for reference purpose only. Due to continuing improvements, actual
product may differ slightly from the product described herein and this Quick Start Guide is subject to
change without notice. For more detailed operations, please refer to the User Manual.
Notes: For commercial vehicles, refer to the above connection method to proceed.
For passenger vehicles, replace the “Non-16pin connector” with “OBD I adaptor” +
“non-16pin connector(for passenger vehicle)”. Other connections shall also apply.
A For Passenger Car Edition