Product Manual

19
Asymmetric Pulley Configuration Continued….
The photo below illustrated the proper alignment and placement of the pulleys into
the overhead beam. Note that the outer pulley is positioned on the overhead
beam in the outer most axle holes and that it is closest to the front of the lift. The
inner pulley is positioned in the inner most axles holes and is mounted toward the
rearward area of the lift. When installing the opposite set of pulleys they must
correspond exactly as the first set of pulleys that you installed.
Symmetric Pulley Assemble shown on the following page
Note: Inner pulley is
facing to the rear of the lift
Note: Outer pulley is
facing to front of the lift