Product Manual

5
28. Do not remove hydraulic fittings while under pressure.
WARNING! Failure by purchaser to
provide the recommended mounting surface
could result in unsatisfactory lift performance, property damage, or personal injury.
LOCATION
This lift has been evaluated for indoor use only with an operating ambient temp. range of 5 - 40°C (41-
104°F)
For additional safety instructions regarding lifting, lift types, warning labels,
preparing to lift, vehicle spotting, vehicle lifting, maintaining load stability,
emergency procedures, vehicle lowering, lift limitations, lift maintenance,
good shop practices, installation, operator training and owner/employer
responsibilities, please refer to “Lifting It Right” (ALI/SM) and “Safety Tips”
(ALI/ST) and vehicle lift points for service garage lifting SAE J2184.
For additional instruction on general requirements for lift operation, please
refer to “Automotive Lift-Safety Requirements for Operation, Inspection and
Maintenance” (ANSI/ALI ALOIM).
Installation shall be performed in accordance with ANSO/ALI ALIS, Safety
Requirements for Installation and Service of Automotive Lifts.
ATTENTION!
This lift is intended for indoor installation only. It is
prohibited to install this product outdoors. Operating environment
temperature range should be 41 – 104 °F (5 – 40 °C).
Failure to
adhere will result in decertification, loss of warranty, and
possible damage to the equipment.