Instructions / Assembly

1. Attach the nipple to the mounting strap, then secure it
with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using
two mounting screws.
3. Adjust the center pipe in an upright position by using
the swivel.
4. Choose the length of the chain you need, then weave
the fixture wire and the fixture grounding wire through
the chain. Then connect one end of the chain with the
loop by using the loop lock.
5. Secure the top loop to the nipple tightly.
6. Thread the fixture wire and fixture grounding wire
through the collar, canopy, top loop, nipple and
mounting strap.
7. Connect the other end of the chain with the top loop
by using the loop lock.
8. Pull out the outlet wires and fixture house grounding
wire from the outlet box. Make wire connections with
wire nuts:
---The smooth wire (marked) from the fixture to the
black wire from the power source.
---The ridged wire (unmarked) from the fixture to the
white wire from the power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw. Then connect
it to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
9. Attach the canopy to the mounting strap by inserting
the top loop, then secure it with the collar.
10. Attach the candle tubes onto the sockets. Then install
bulbs (not included). See relamping label at socket
area or packaging for maximum allowed wattage.
11. Turn on the power at the main fuse or circuit breaker
box.
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
Fixture Wire
Chain
Fixture Grounding
Wire
Collar
Top Loop
Canopy
Loop Lock
Loop Lock
Loop
Center Pipe
Mounting Screw
Nipple
Mounting Strap
Green Grounding Screw
Hex Nut
Wire Nut
Washer
Outlet Box
House Grounding Wire
Assembly Instructions
Vivienne Chandelier # HX1111
Socket
Swivel
Candle Tube