Instructions / Assembly

1. Attach nipple(-a) to the mounting strap, then secure
it with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using
two mounting screws.
3. Secure the top loop to nipple(-a).
4. Screw nipple(-b) into coupling and secure it with a
hex nut. Then attach the cap and decoration onto the
fixture by inserting nipple(-b), secure them with a hex
nut and loop.
5. Choose the length of the chain you need, then weave
the fixture wire and the fixture grounding wire through
the chain, collar and canopy.
6. Connect one end of the chain with the loop by using a
loop lock.
7. Connect the other end of the chain with the top loop by
using another loop lock.
8. Thread the fixture wire and fixture grounding wire through
the top loop, nipple(-a) and mounting strap.
9. Pull out the outlet wires and house grounding wire from
the outlet box. Make wire connections with wire nuts:
---The smooth wire (marked) from the fixture to the
black wire from the power source.
---The ridged wire (unmarked) from the fixture to the
white wire from the power source.
---Attach the fixture grounding wire to the mounting
strap with the green grounding screw. Then connect
it to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
10. Attach the canopy to the mounting strap by inserting the
top loop, then secure it with the collar.
11. Attach the candle tubes onto the sockets, then install
bulbs (not included). See relamping label at socket area
or packaging for maximum allowed wattage.
12. Install the crystal drops and pearl strand as shown in
diagram.
Note: To replace broken crystal drops -Open the
pins to remove the crystal drops, hook the new
crystal drops, and then close back pins. Avoid
bending the pins into sharp angle.
13. Turn on the power at the main fuse or circuit
breaker box.
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THIS INSTRUCTION.
Fixture Wire
Chain
Fixture Grounding
Wire
Collar
Top Loop
Canopy
Loop Lock
Loop Lock
Loop
Hex Nut
Decoration
Cap
Nipple(-b)
Hex Nut
Fixture
Coupling
Mounting Screw
Nipple(-a)
Mounting Strap
Green Grounding Screw
Hex Nut
Wire Nut
Washer
Outlet Box
House Grounding Wire
Assembly Instructions
Chella Mini Chandelier # MCH010
Socket
Candle Tube
2
4
3
2
1
1
1
Note: Spare crystal
drops are enclosed
in hardware bag.
1
2
3
4
5 Sets5 Sets
6 PCS20 PCS