Instructions / Assembly

Assembly Instruction
Please read these instructions carefully before starting assembly. We
suggest you carry out the assembly on a soft surface like a carpet, so as to
avoid scratching the paint. Keep children away during assembly. This item
contains small parts which can be swallowed by children.
function and is not to be used as a toy. This product is for residential use
only. This product is NOT intended for commercial use; unintended use
will void the warranty.
This product is not intended for use during inclement or severe weather,
that includes but is not limited to rain, hail, sleet, snow, wind, freezing
conditions and extreme heat.
Please note because of the nature of cast metal, you may find roughness
on the surface which enhances the beauty of the product and is not a
defect. Aluminum is soft metal, please do not use power tools, and over
tighten may strip threads or break the parts.
not locate the product near any sort of high heat. Do not use the product
as a support.
supervised by a competent adult at all times.
assembly instructions for future reference or warranty.
1. Step 1 Place all the parts on a clean and soft surface, identify all the
parts and hardware kits against parts list. Turn over the Table top(A) onto a
flat surface; Attached 4 table Legs(B) with hardware kits(F,G,H) to the studs
pre-installed by manufacturer on the table as Fig(1). Tighten all the nuts(H)
loosely at this stage;
2. Step 2: Now assemble the 4 Leg Connectors(C) which interlink and
place onto the pre-installed studs on the Legs(B) with hardware kits(F,G,H)
and loosely tighten as Fig(2);
3. Step 3: Tighten all the nuts with Wrench(U) step by step. Do NOT
over tighten nuts. Put on all the Caps(I);
4. Step 4: Turn over the table. Your table is now ready for use. If find the table
is not stable, leveling the regulating screws pre-installed under Leg(C).
FG H I
B
FG H I
C
Fig(1)
Fig(2)
I H G F
A
Item
Photo
Description
Qty
Item
Photo Description
Qty
A
Table top
1
G
Lock Washer
12
B
Leg
4
H
Nut
12
C
Leg Connector
4
I
Cap
12
F
Washer
12
U
Wrench
1