ASSEMBLY INSTRUCTION Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Separate, identify and count all parts and hardware. Compare with the parts list to be sure all parts are present. IMPORTANT : PLEASE READ INSTRUCTION BEFORE STARTING THE ASSEMBLY.
HARDWARES LIST DRAWING QTY ITEM DESCRIPTION A MINIFIX CAM LOCK 28 PCS B MINIFIX CAM BOLT 28 PCS C WOOD DOWEL (M8 x 25MM) 16 PCS D WOOD DOWEL (M6 x 25MM) 16 PCS E TRUSS M-SCREW (20MM) 4 PCS F 6/8" NAIL 16 PCS G HANDLE 2 PCS H LEFT DRAWER SLIDE 2 PCS I RIGHT DRAWER SLIDE 2 PCS MORE HARDWARES DETAIL IN NEXT PAGE...
HARDWARES LIST DRAWING QTY ITEM DESCRIPTION J CSK SCREW M3 x 10mm 16 PCS K PLASTIC STRIP (H SHAPE) 1 PC L BOTTOM SUPPORTING PLASTIC 4 PCS M PANHEAD SCREW (M4 x 21MM) 16 PCS PARTS LIST DRAWING QTY ITEM DESCRIPTION N1 TOP PANEL 1 PC N2 LEFT PANEL 1 PC N3 RIGHT PANEL 1 PC N4 TOP SUPPORT RAIL 2 PCS MORE PARTS DETAIL IN NEXT PAGE...
PARTS LIST QTY ITEM DESCRIPTION N5 BOTTOM PANEL 1 PC N6 BACK PANEL 2 PCS N7 DRAWER HEAD 2 PCS N8 DRAWER BACK PANEL 2 PCS N9 DRAWER BOTTOM PANEL 2 PCS 19 DRAWER LEFT PANEL 2 PCS 20 DRAWER RIGHT PANEL 2 PCS 21 DRAWER BOTTOM SUPPORT RAIL 2 PCS 22 SUPPORT LEG 4 PCS DRAWING PAGE 4 OF 19
PARTS ' LOCATION NIGHTSTAND x 1 PC N1 N4 N6 N3 N2 N5 22 22 DRAWER x 2 PCS N8 20 19 N9 21 N7 PAGE 5 OF 19
ASSEMBLY STEPS STEP 1 Fix the 2 pieces (H) to the (N2) by using 8 pieces (J).Then insert 4 pieces (A) and 2 pieces (B) as shown. H H N2 J N2 J Finished edge Insert screw to tight this hole first Arrow need to face outside. Arrow need to face outside.
STEP 2 Fix the 2 pieces (I) to the (N3) by using remaining 8 pieces (J).Then insert 4 pieces (A) and 2 pieces (B) as shown. I I N3 N3 J J Insert screw to tight this hole first Finished edge Arrow need to face outside. Assembled looks Arrow need to face outside.
STEP 3 Insert 4 pieces (A) and 2 pieces (C) to (N4) as shown. N4 C Arrow need to face outside. Arrow need to face outside. Arrow need to face outside. A Assembled looks STEP 4 Insert 4 pieces (B) and 6 pieces (C) to the (N5) as shown.
STEP 5 Insert 8 pieces (B) and 6 pieces (C) to the (N1) as shown. B C N1 Assembled looks STEP 6 Combine the (N4) to the (N2) and tighten the 2 pieces (A)-(pre insert in step 3) as shown.
STEP 7 Combine the (N3) to the (N4) and tighten the another 2 pieces (A)-(pre insert in step 3) as shown. INSIDE VIEW N2 N3 N4 N4 STEP 8 Combine the (N5) to the (N2) and (N3) then tighten the 4 pieces (A)-(pre insert in step 1 and 2) as shown.
STEP 9 Insert the 16 pieces (M) fix (L) to the (N5). Then turn (22) clockwise to combine to the (L) as shown.
STEP 10 Combine the (N1) to the frame then tighten the remaining 8 pieces (A)-(pre insert in step 1 to 3) as shown. N1 INSIDE VIEW N4 N4 N2 N2 N3 N3 N5 22 STEP 11 Put the (N6) to the gap of (K) as shown.Direction of the side with colored paper must be the same.
STEP 12 Insert the 16 pieces (F) to fix the (N6) as shown. Colored paper face to outside. To prevent blocking (N1) and (N5), make sure the (K) at the middle of (N6) , do not over high or lower. K N1 N6 N6 F N2 N5 STEP 13 Insert 3 pieces (B) to the (N7) as shown.This step needs to be done twice.
STEP 14 Insert 1 piece (A),(B) and 2 pieces (D) to (19) as shown.This step needs to be done twice. B Arrow need to face outside. 19 Assembled looks A D STEP 15 Insert 1 piece (A),(B) and 2 pieces (D) to (20) as shown.This step needs to be done twice. B Arrow need to face outside.
STEP 16 Insert 2 pieces (A) , 1 piece (B) and 4 pieces (D) to (N8) as shown.This step needs to be done twice. Arrow need to face outside. Arrow need to face outside. A B D N8 Assembled looks STEP 17 Insert 2 pieces (A) to (21) as shown.This step needs to be done twice. Arrow need to face outside. Arrow need to face outside.
STEP 18 Combine the (19) and (20) to the (N8) . Then tighten the 2 pieces (A)-(pre-insert in step 16) as shown.This step needs to be done twice. N8 20 19 N8 STEP 19 Put the (N9) into the gap of (19),(20) and (N8) as shown.This step needs to be done twice.
STEP 20 Combine the (21) to the (N8) then tighten the 1 piece (A)-(pre-insert in step 17) as shown.This step needs to be done twice. N8 N9 19 20 21 90 ° STEP 21 Combine the (N7) to the drawer frame. Then tighten the 3 pieces (A)-(pre-insert in step 14,15 and 17) as shown.This step needs to be done twice.
STEP 22 Insert 2 pieces (E) fix the (G) as shown.This step needs to be done twice. G E 19 20 N7 STEP 23 Align the position then push the 2 pieces drawer to inside exactly by your hand as shown.
STEP 24 ASSEMBLY COMPLETED PAGE 19 OF 19