Use & Care Guide

Installation instructions (continued)
2. Connecting the wires
□ Install the fixture bare copper wire (1) under
the ground screw (EE) on the mounting plate
(BB).
□ Connect the fixture bare copper wire (1) to
the green (or bare, or green & yellow) supply
ground wire (2) in the outlet box using a wire
nut (AA).
□ Connect the white fixture wire (3) to the
white (or ribbed) supply wire (4) in the outlet
box using a wire nut (AA).
□ Connect the black fixture wire (5) to the black
(or red, or blue) supply wire (6) in the outlet
box using a wire nut (AA).
3
1
EE
2
6
1
5
AA
4
House wire
black
(or red, or blue)
(HOT)
Fixture wire
smooth
(HOT)
House wire
white
(NEUTRAL)
Fixture wire
White
(NEUTRAL)
House wire
green
(or bare wire,
or green & yellow)
(GROUND)
Fixture wire
bare wire
(GROUND)
3. Installing the fixture and bulb
□ Push all excess wires into the outlet box.
□ Raise the fixture to the ceiling and secure the
canopy assembly (A) in place with two finials
(GG).
□ Place the glass shade (B) over the socket and
secure with the metal cap (C) and socket ring
(D).
A
B
C
D
GG
Socket