Installation Guide

Laurel Mountain - Owner’s Manual
Silent Pump Upgrade
The Silent pump has a simple, push-button operation.
It does not include a 3-speed control like the standard
pump. However, all the whirlpool jets can be individually
adjusted for intensity.
With it’s revolutionary design, the heat energy
generated by the pump is released into the water.
This not only keeps the motor cool, it also generates
“free heat” back into your water for a bath or
whirlpool experience that stays warm longer without
the use of an additional heater. And once you’ve
finished your bathing experience, it’s easy to empty
your tub with our self-draining, single stage,
centrifugal motor pump.
The Silent Pump is also extremely energy efficient.
It consumes 60% less energy than traditional pumps
with an electrical heater and generates more than 15%
more water flow than the closest competitor.
Radiant Heat
The Radiant Heat pad comes factory installed under the backrest of the tub. We recommend turning on the
Radiant heat 5-10 minutes prior to using the tub. Use the touchpad to turn the unit on/off and to switch
between the two temperature settings.