User's Manual

Power Requirements
The Eden LT-386 microphone requires power from the included LT386PSU power supply. This microphone will not work properly
with any other power supply. Please make sure you select the proper power supply voltage (Figure 6)
.
for your country (i.e. 115V for
U.S. and Japan, 230V for Europe) located on the back of the LT386PSU power supply. Failure to select the proper voltage is
dangerous and will damage the microphone.
Voltage Selector
Before using your microphone or power supply, check to ensure the proper voltage is selected on the back of the power supply. If
not, using a Philips head screw driver carefully remove the plastic safety cover over the voltage switch and select your correct
voltage. Reattach the safety cover when complete.
Do not connect this microphone to any power source other than the included power supply.
Check for proper voltage selection on rear of power supply.
Figure 6. Voltage switch and safety cover