Lava 2SP-550 Installation Manual SERIAL 1 SERIAL 2 P.N. MOKO L37.5 LAVA 2SP MADE IN LAVA COMPUTERS PARALLEL PORT CANADA Rev.
Hardware Set-Up Parallel Mode Settings Serial 2 Serial 1 Parallel Settings Serial 2 Settings 16C552 Parallel Port Serial 1 Settings Serial IRQ Settings Serial Settings COM 1 (03F8h)* Parallel Settings COM 3 (03E8h) LPT 1 (0378h) (default) COM 4 (02E8h) LPT 2 (0278h) Default for Serial1 COM 2 (02F8h)** Default for Serial2 Serial IRQ Settings Serial 1 5 2 4 3 IRQ 7 (default) Parallel Mode Settings Serial 2 15 12 11 10 7 IRQ 5 Bi-directional (default) Output
2SP-550 Configuration Serial Configuration 1. Determine the number of serial ports installed in your system. Each serial port will have an unique "COM" designation. Configure the ports of the 2SP550 for two unused COM addresses. 2. Determine which IRQ's (interrupts) are free in your system. Configure each serial port on the 2SP-550 for an unused IRQ. Although some devices allow sharing of IRQ's, this is not recommended. 3a.
Lava Technical Support 9:00 am to 5:30 pm Monday to Friday (Eastern Time) Tel: +416 674-5942 Fax: + 416 674-8262 E-mail: tech@lavalink.com Internet: www.lavalink.com Lava Computer MFG Inc. This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Lava Computer MFG Inc. 908 Niagara Falls Blvd.