LAVA 2SP-PCIe [DB-9, DB-9] Quick Installation Guide PORT A PORT B Pb RoHS LAVA COMPUTERS MADE IN SEMICONDUCTOR P.N. MOKO L143.x Rev.
1 Windows Hardware and Driver Installation 1. Before opening the casing of your computer, make sure that all power is off. 2. Locate an unused PCIe slot and insert the 2SP-PCIe card into it. Ensure that the card is well seated. 3. Screw the metal bracket of the 2SP-PCIe card to your PC’s casing, screw the second serial port bracket to the casing also, and replace the machine’s cover. 4. Turn the PC on. 5.
2 Changing Com numbering of the 2SP-PCIe ports In Windows 2000/XP/Vista, Com port numbering can be changed by double-clicking the serial port entry displayed in Windows' Device Manager (as described earlier). Go to Port Settings | Advanced, and choose Com Port #. Release Notes: A. Because the 2SP-PCIe card uses PCI (not ISA) I/O address ranges, it will never be seen by your BIOS at boot-up as a standard port even if the address has been changed in Windows using the above procedure.
LAVA Technical Support 9:00 am to 5:30 pm Monday to Friday (Eastern Time) Tel: +416 674-5942 Fax: + 416 674-8262 E-mail: tech@lavalink.com Internet: www.lavalink.com LAVA Computer MFG Inc. This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.