IEEE 1394 PC-Card Interface Adapter Rev.
Congratulations on your purchase of the Lava IEEE 1394 Interface Adapter. The Lava IEEE 1394 Interface Adapter is a PC bus card for connecting high-performance serial bus IEEE 1394. It is compatible with IEEE 1394-1995, P1394a, and OHCI 1.0 standards, supported in Windows® 98 SE/ME/2000. By simply plugging in the Lava IEEE 1394 Interface Adapter, you will: · Instantly add a 1394 serial bus to any 1394-capable · computer. Ensure transfer rates of up to 400 Mbps.
Installation and Removal Insert the Lava IEEE 1394 Interface Adapter into the PC Cardbus slot of a computer. Note: Lava recommends turning off the computer when inserting or removing the card. Not doing so may hang the computer with some operating systems and some slots. Note: In some cases, some versions of Windows® may require the Windows Installation CD to supply drivers for the card.
Driver Installation 1. When Windows® detects your PC-Card, it will initiate the Add New Hardware Wizard. Click ‘Next’ to continue. The text of your screens may differ slightly from those shown. 2. Click ‘Next’ to initiate a search for the best driver for your device.
3. If necessary, insert the Windows® CD-ROM, and click ‘Have Disk....’ 4. A download dialog box will appear briefly, indicating the progress of the driver installation. When installation is complete, click "Finish.
This page intentionally left blank.
For Europe This device is in conformity with the EMC directive. Tested to comply with FCC standards. FOR HOME OR OFFICE USE. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.
Lava Technical Support 9:00 am to 5:30 pm Monday to Friday (Eastern Time) Tel: + 416-674-5942 Fax: + 416-674-8262 E-mail: tech@lavalink.com Internet: www.lavalink.com Lava Computer MFG Inc.