Lava SSerial-550 Installation Manual SSERIAL BOARD LAVA COMPUTERS MOKO L16.3E MADE IN CANADA Rev.
Hardware Set-Up Address Block IRQ Block Address Block Configuration IRQ Block Configuration (COM Settings) COM-1 03F8h default COM-2 02F8h IRQ-4 default IRQ-3 COM-3 03E8h COM-4 02E8h IRQ-5 IRQ-7
Serial Configuration 1. Put only one jumper on each jumper block, to represent the desired Com & IRQ setting. 1. Afin d'obtenir les "COM" et "IRQ" désirés, veuillez n'installer qu'un connecteur par bloc de connecteurs. 2. If you have only one Com port, set up the SSerial-550 for Com 2 and IRQ 3. 2. Si vous avez un "COM," ajoutez la SSerial-550 pour "COM" 2 et "IRQ" 3. 3. It is recommended that each Com Port be assigned a unique IRQ by the user. 3. On veut avoir l' "IRQ" unique pour chaque "COM" Port.
Lava Technical Support 9:00 am to 5:30 pm Monday to Friday (Eastern Time) Tel: +416 674-5942 Fax: + 416 674-8262 E-mail: tech@lavalink.com Internet: www.lavalink.com Lava Computer MFG Inc. This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Lava Computer MFG Inc. 908 Niagara Falls Blvd.
